|
●Serial Peripheral Interface(SPI)
-Standard SPI: SCLK, /CS, SI, SO, /WP, /HOLD
-Dual SPI: SCLK, /CS, IO0, IO1, /WP, /HOLD
-Quad SPI: SCLK, /CS, IO0, IO1, IO2, IO3
-QPI: SCLK, /CS, IO0, IO1, IO2, IO3
-Software & Hardware Reset
● Read
-Normal Read (Serial): 50MHz clock rate
-Fast Read (Serial): 108MHz clock rate
-Dual/Quad (Multi-I/O) Read: 108MHz clock rate
● Program
-Serial-input Page Program up to 256bytes
-Quad-input Page Program up to 256bytes
● Erase
-Block erase (64/32 KB)
-Sector erase (4 KB)
-Chip erase -Erase Suspend and Resume
● Program/Erase Speed
-Page Program time: 0.7mstypical
-Sector Erase time: 60ms typical
-Block Erase time: 0.3/0.5stypical
-ChipErase time: 60stypical
|
●Flexible Architecture
-Sector of 4K-byte
-Block of 32/64K-byte
●Low Power Consumption
-25mA maximum active current
-5uA maximum power down current
●Software/Hardware Write Protection
-4x256-Byte Security Registers with OTP Lock
-Enable/Disable protection with WPPin
-Write protect all/portion of memory via software
-Top or Bottom, Sector or Block selection
●Single Supply Voltage
-Full voltage range: 1.65~1.95V
●Temperature Range
-Commercial (0°Cto +70°C)
-Industrial (-40°Cto +85°C）
●Cycling Endurance/Data Retention
-Typical 100k Program
-Erase cycles on any sector
-Typical 20-year data retention at +55°C
|
